Tamhu

Occupations · Architecture and Engineering

Calibration Technologists and Technicians

Execute or adapt procedures and techniques for calibrating measurement devices, by applying knowledge of measurement science, mathematics, physics, chemistry, and electronics, sometimes under the direction of engineering staff. Determine measurement standard suitability for calibrating measurement devices. May perform preventive maintenance on equipment. May perform corrective actions to address identified calibration problems.

O*NET 30.3 Database (USDOL/ETA) · occupation code 17-3028.00

$65,040median annual wage, May 2024
15,320people employed, United States
▲ 4.7%projected change, 2024→2034
1,400openings a year, incl. replacements

What it pays

A single “average salary” hides the spread. This is the whole distribution — the gap between the bottom and top bar is usually the number that matters.

Lowest 10%$44,730Lower quarter$52,250Median$65,040Upper quarter$83,600Top 10%$105,440

BLS Occupational Employment and Wage Statistics, May 2024 · national, cross-industry · annual wage

These are national figures, identical for every reader. The report recuts them for your metro area and ranks it among all of them.

Get yours →

Pay over time

Median up 8% between 2021 and 2024, before inflation. The band shows the 10th to 90th percentile.

$65,040 202120232024$43,400$99,000

BLS OEWS, one release per year. Before May 2011 only national estimates were published, so geography detail starts there.

Where the jobs are

Metro areaMedian wageEmployed
Houston-The Woodlands-Sugar Land, TX$65,3701,260
Dallas-Fort Worth-Arlington, TX$63,710740
New York-Newark-Jersey City, NY-NJ-PA$78,000560
Los Angeles-Long Beach-Anaheim, CA$64,010450
Baton Rouge, LA$78,490330

BLS OEWS May 2024, metropolitan estimates · the 5 areas with the most people in this occupation

Your metro area, and where it ranks

Locked

All metropolitan areas BLS publishes for this occupation, with your own city's median and its rank among them.

Open in your report →

Typical education to enter: Associate's degree · BLS Employment Projections 2024–34

Software and tools

A dot marks what O*NET flags as in demand.

Apple macOS●Autodesk AutoCAD●Autodesk AutoCAD Civil 3D●Bentley MicroStation●Dassault Systemes SolidWorks●Linux●Microsoft Excel●Microsoft Office software●Microsoft Outlook●Microsoft PowerPoint●Microsoft Project●Microsoft Word●The MathWorks MATLAB●MathWorks SimulinkMinitabNational Instruments LabVIEW

O*NET 30.3 software skills · hot-technology flag

What your tools are worth

Occupation-based, not posting-based: how much employment, pay and projected growth sit behind each tool. It is not a count of job ads.

ToolValueSpread across occupations
The MathWorks MATLAB8580 → 111 occupations since 2015
Linux8055 → 122 occupations since 2015
MathWorks Simulink7619 occupations; absent from the 2015 catalogue

What your tools are worth

Locked

The same score for every tool in this occupation, plus the ones you ticked and the ones you did not.

Open in your report →

What this work is actually like

Conditions rated against the average across all occupations — only what makes this job different is listed.

3 / 5Medium preparation — vocational training or an associate degree, plus 1–2 years of work.

O*NET 30.3 Job Zones

What kind of person the work suits

Occupational interest profile, rated 1 to 7.

Realistic6.3
Conventional5.6
Investigative4.1

O*NET 30.2 occupational interests (RIASEC)

How this job is advertised

The same work is posted under many titles — this is what to search for.

Test TechnicianCalibration EngineerEquipment TechnicianHydrometer CalibratorInstrument TechnicianCalibration SpecialistCalibration TechnicianElectronics TechnicianMaintenance TechnicianCalibration CoordinatorCalibration TechnologistField Service TechnicianInstrumentation TechnicianMobile Technician (Mobile Tech)

O*NET 30.3 job titles reported for this occupation

Get this as a personal report

The same sourced evidence, recut for the closest published view of your city, state or industry, as a dated PDF.

Free page vs. the $29 report

The page above is a public national reference, identical for every reader — and we deliberately give away a lot of it. The report does three things this page cannot: it answers the question you type in your own words, using only figures that appear in the report with their sources; it ranks your city among all 445 metros instead of the twelve shown here; and it places your level on the employer pay ladder. Choose $49 for the wider comparison of industries, places and next moves, $99 to add named employers and the international purchasing-power index.

The questions that change the report

Only what the data can actually act on. Your city picks the published cut; your level places you on the employer pay ladder; your question is answered using the report's own figures and nothing else.

Two fields are required: your email and the profession. Everything below is optional — each answer you leave empty simply removes one section from the report.

Nothing answered yet — the report still works, it is just shorter

Your level

Median employer offer at each level

optionalAdds to the report: the pay ladder with your level marked

Which of these skills do you have

Essential skills for this occupation per the ESCO classification, most specific first. The report shows what you have and what separates you from the occupation's profile.

optionalAdds to the report: the section “Your cut” — what you have and what is missing

Which of these do you use

Flagged by O*NET as frequently requested in this occupation. The report shows what you have and what is missing.

optionalAdds to the report: the tools gap, and from $49 what each tool is worth

optionalAdds to the report: the route out of this occupation, when you pick “change”

optionalAdds to the report: the purchasing-power comparison with that country

optionalAdds to the report: the opening section — your question answered from this report's own figures

Adds to the report: every pay figure recut for your metro, and its place in the national range

Adds to the report: the pay cut by industry, where the same job is paid differently

This is what we will put in your report

Pick the depth. The sections you ticked questions for are in every tier; the wider comparisons start at $49.

Compare the three reports

What you learn$29$49$99
What it pays in your city and industry✓✓✓
Working conditions, preparation, education✓✓✓
What you carry into another occupation✓✓✓
What this job is called in postings✓✓✓
How pay changed over the yearsbrief✓✓
Where the industry changes the number—✓✓
Where the work actually is—✓✓
What appeared and disappeared in the job—✓✓
How long it takes to become competent—✓✓
Where to move next and what to learn—✓✓
What AI is already changing in this job—✓✓
What your tools are worth on the market—✓✓
What to study to get in—✓✓
What the same work pays in Britain——✓
What the same work pays in Canada——✓
Who hires, by name, and at what rates——✓
The money ladder by skill level——✓
Cities that actually sponsor visas——✓
Sections in the report, typically73–7155–16198–23
Who it is forIf you are deciding whether this work is worth your time.If you are in the occupation and deciding where to move next.If you are aiming for an offer abroad.
No payment is taken now. We reply with a secure payment link.

What changed since 2021

Comparing O*NET release 25.2 (2021-02-01) with 30.3 (2026-05-01). Signs, not colour alone, carry the meaning.

Now listed 7

+The MathWorks MATLAB+Microsoft Office software+MathWorks Simulink+Microsoft PowerPoint+Microsoft Excel+Microsoft Outlook+Microsoft Word

No longer listed 1

−Data entry software

Diff across the O*NET releases held here in full since October 2015, following occupations through merges and retirements. O*NET re-surveys occupations on a rolling cycle, so “no change” can also mean “not re-surveyed”.

Related jobs

O*NET 30.3 related occupations

Also called

Test TechnicianEquipment TechnicianCalibration EngineerInstrument TechnicianHydrometer CalibratorElectronics TechnicianCalibration TechnicianCalibration SpecialistMaintenance TechnicianCalibration CoordinatorCalibration TechnologistField Service Technician

O*NET 30.3 alternative titles

The same work in Europe

ESCO occupationISCOMatch
metrology technician3111.9exact
precision instrument assembler7311.4close
metrologist2112.2close
instrumentation engineering technician3114.1.4close
instrumentation engineer2152.1.3close
precision device inspector7543.10.3broader
calibration technician3113.1.1broader

Official ESCO ↔ O*NET crosswalk (ESCO Secretariat with USDOL/ETA)

Keep exploring

See labor-market evidence in motion.

Watch short Tamhu stories about pay, growth and how work changes — then return to the source data here.

Watch on YouTube →

Watch this occupation

This job has changed before and it will change again. We'll email you when the data moves — a tool appears, a skill gains weight, the pay distribution shifts. Free, and one click to stop.

Check your inbox — your watch starts only after you confirm.

We send data, not advice. No sharing, no resale. Privacy